Construction companies are using the Oil Solutions liquid and oil solutions powder on there trucks and a quick response and for older oil stains. These older stains are oil leaks from hydraulic lines, most trucks especially construction vehicles leak hydraulic oil and diesel oil. When this oil leaks from these trucks, the trucks are usually on other peoples properties. When the truck pulls away there is typically a sizable oil stain left in the concrete, asphalt or soil. These types of spills can be very expensive and time consuming. The traditional treatment would be some kitty litter and then possibly power washing neither of these treatments are effective. The Oil Solutions system is simple and works 100% to remove old oil stains from any surface. Companies like Kinsley Construction & Penta Construction, have the OS spill kits on there trucks and also back at the shop. If a spill occurs they can put down the OS powder first, which if applied early will clean 95% of the spill within a few minutes which is much better faster and cheaper from the traditional methods. If the oil has penetrated the surface and left a stain, OS liquid is used. This can be poured on or sprayed on with an air sprayer. Apply the OS liquid step 1 & 2, step back and let the magic happen, The OS liquid is simply left to dry, no labor or action has to be taken, The OS liquid will slowly turn the oil to a dry non toxic sand remove the stain and no further action has to be taken, The OS liquid will leave a light white haze behind, This will disappear in time.