How to Clean Standing or Pooling Oil

For oil pooling or standing oil, usually a new spill, use OS Powder.

1lb. of OS Powder cleans approximately 1.5 gallons of oil.

Best used heavily. Any remaining white powder can be reused.

On water:

1. Apply OS Powder generously. You must apply enough so that virgin white powder remains on top.
2. Let sit for at least 1 hour. The longer it sits, the better the results will be.
3. After at least 1 hour, skim all the powder off the water. Discard the used powder; any unused white powder can be saved.

On a hard surface (for pooling or standing oil):

1. Apply OS Powder generously. You must apply enough so that virgin white powder remains on top.
2. Let sit for 5-15 minutes, then sweep or scrape up the powder.
3. Discard all used powder; any unused white powder can be saved.

Choose the right amount of OS Liquid from the following products depending on the age, size and amount of the spilled oil that’s causing the smell.